Movement Holder for Vostok Movements:
TL8050
Sales Price: US$23 plus shipping, to many locations worldwidePayment Method: Paypal
Email Address: sales.murphymanufacturing@gmail.com
Movement Holder for Vostok Movements:
Sales Price: US$23 plus shipping, to many locations worldwidePayment Method: Paypal
Email Address: sales.murphymanufacturing@gmail.com
Sales information:
This is the TL8050 movement holder for Vostok Amphibia watch modders.
It was designed and built because I wanted one for my watch bench.
The top will hold the bare plates of the movement, from movement assembly to dial installation.
A central jewel support screw is included, to support the seconds hand end-tensioning spring. In hand-wind only movements, it is very difficult to set the seconds hand without some kind of support.
Constructed of 6061-T6 Aluminum, unplated.
Buy one (1) TL8050 Movement Holder, US$23
Shipping will be added during checkout.
---- Sorry, this batch is SOLD OUT -----
We designed the best movement holder for Vostok modders, and made a small batch.
It took a very long time to sell that batch. Should we make more?
If you wish to be notified when we have made another batch of TL8050 movement holders,
please Email Us.
(Clicking the link will launch your default email client)
If you click the link:
-There is no obligation to buy.
-We will acknowledge your email to us.
-When we have bezels ready to go, we will send one (1) email notifying you.
-We will not send spam.
-We will not continue to send emails through a mailing list.
If you have questions about the TL8050 movement holder, wish to buy a different quantity, or if you have difficulty with the shopping cart,
please Email Us.
(Clicking the link will launch your default email client)
Please read the Default Shipping Information at the link shown in the header!
This is the TL8050 movement holder for Vostok Amphibia watch modders.
It was designed and built because I wanted one for my watch bench.
The top will hold the bare plates of the movement, from movement assembly to dial installation.
A central jewel support screw is included, to support the seconds hand end-tensioning spring. In hand-wind only movements, it is very difficult to set the seconds hand without some kind of support.
Constructed of 6061-T6 Aluminum, unplated.
Buy one (1) TL8050 Movement Holder, US$23
Shipping will be added during checkout.
---- Sorry, this batch is SOLD OUT -----
We designed the best movement holder for Vostok modders, and made a small batch.
It took a very long time to sell that batch. Should we make more?
If you wish to be notified when we have made another batch of TL8050 movement holders,
please Email Us.
(Clicking the link will launch your default email client)
If you click the link:
-There is no obligation to buy.
-We will acknowledge your email to us.
-When we have bezels ready to go, we will send one (1) email notifying you.
-We will not send spam.
-We will not continue to send emails through a mailing list.
If you have questions about the TL8050 movement holder, wish to buy a different quantity, or if you have difficulty with the shopping cart,
please Email Us.
(Clicking the link will launch your default email client)
Please read the Default Shipping Information at the link shown in the header!
Vostok Movement Holder:
TL8050
Technical Information:
This movement holder is CNC machined from 6061 Aluminum.
It is designed to work with the following Vostok Movements:
The 24xx family, including 2414, 2416b,
2409, 2415, 2426, 2431, etc.
When these movements are used in the Vostok Classic Amphibia 200 meter dive watches, they often come with a screwed-on plastic or metal movement spacer.
The reverse side of the holder will accept that Amphibia movement spacer.
This movement holder features a central jewel support screw.
Shown below, a Vostok 24xx movement without movement Spacer, held in the top of the movement holder.
Movement service may be performed in usingthis end of the movement holder.
There are milled access grooves for he dial feet screws
There is a central jewel support screw.
This movement holder does not have a clamping feature.
Shown below, a Vostok 24xx movement, with the Amphibia case spacer screwed on. The bottom of the movement holder is configured to hold the plastic or metal spacer.
Click to see
Shipping Information